Honeywell Chadwick-Helmuth 177M-6A Features and Specifications * • Power Cable - connects to the aircraft's 12 or 28 VDC supply • Receptacles - for cable from transducer and magnetic pickup from the left prop • Receptacles - for cable from transducer and magnetic pickup from the right prop • Magnetic Pickup Switch - 'independent' position creates two independent circuits enabling the user to record balance reading from two propellers in one 'run.' The 'common' position is used for helicopter work where two transducers are referenced to one magnetic pickup. • Function Switch - selects propeller track function, or either left or right balance circuits • IPS Meter - shows vibration level • RPM Tune Dial - tunes the band pass filter to the RPM of the vibration • RPM Range Switch - multiplies RPM of the RPM tune dial reading by factors of 1, 10, and 100 • Push For Scale #2 - when depressed, changes IPS meter sensitivity from 0 to 1.0 IPS to 1.0 to 10.0 IPS • Verify Tune Button - used in conjunction with RPM tune dial to adjust balancers band pass filter to theexact propeller or vibration frequency.
Hack All Channels Skycable Digibox on this page. • Interrupter Logic Switch - single position is used for propeller balance work and the double position for most helicopter smoothing • Test Button - verifies magnetic pickup signal and proper phazor operation • Phazor - reads phase angle (or clock angle) between transducer and magnetic pickup signals.
The above diagram highlights the features of the 177M-6A and 8350 balancers. Please note that if you intend to work with both airplanes and helicopters, the must be included.
Power Cable - connects to the aircraft's 12 or 28 VDC supply 2. Receptacles - for cable from transducer and magnetic pickup from the left prop 3.
Receptacles - for cable from transducer and magnetic pickup from the right prop 4. Magnetic Pickup Switch - 'independent' position creates two independent circuits enabling the user to record balance reading from two propellers in one 'run.' The 'common' position is used for helicopter work where two transducers are referenced to one magnetic pickup.
Washington History Day Topic Guide. Apply to be a Writer. On November 6, 1979, voters in King County passed a bond issue to raise $50,000,000 buy the development. Agricultural and and manual skills. Many of these were “boarding” schools. Chadwick papers. Christiensen Papers. Rirsir-I070 *6:71.17440L. #;f4 e AL, ArYkrsA. June 1972 25p.r studio sound. 177 -300, at £378. Agent: Feldon Audio Ltd. 126 Great Portland Street, London WIN 5PH. Stolen Uher 1200. A UHER 1200 battery tape recorder, serial number 01101, was.
Function Switch - selects propeller track function, or either left or right balance circuits 6. IPS Meter - shows vibration level 7. RPM Tune Dial - tunes the band pass filter to the RPM of the vibration 8. RPM Range Switch - multiplies RPM of the RPM tune dial reading by factors of 1, 10, and 100 9. Push For Scale #2 - when depressed, changes IPS meter sensitivity from 0 to 1.0 IPS to 1.0 to 10.0 IPS 10. Verify Tune Button - used in conjunction with RPM tune dial to adjust balancers band pass filter to the exact propeller or vibration frequency.